Numerical control folds safety of curved machine mould to debug need note

  • Time:
  • Click:130
  • source:KAPLOWITZ CNC Machining
Numerical control changes curved machine pattern is formed by a lot of component, because this must check the status of fine installation when install, and come strictly according to measure undertake, notice safety when installation is debugged at the same time, the step that because this numerical control is folded,bends what engine model installation debugs is very crucial. Numerical control folds the installation of curved machine mould to debug a process: 1, the adjustment of the machine, before undertaking installing, want to adjust good machine function above all, this process must patient and serious undertaking, examine a machine to have dirt and had used iron drossy etc, undertake clearing necessarily, in order to reduce the trouble of later period. 2, the adjustment of slide block journey, the ply that notices to examine good pattern and the scale that notices to check fluctuation module is normal, normal for module should control the switchpoint in journey circuitry to go up, must notice at this o'clock. 3, the adjustment of journey module, the upper limit dot that is aimed at module namely undertakes adjustment, highest point reachs on module when, had installed switch, and obligate gives slide block keep the position, be in at the same time be issued to lower levels when also should undertake decelerate module, better undertake protective machine and mould. 4, interstitial adjustment, basically be to measure upper mould piece and the interval of next module first, specific clearance decides according to what stating fold sheet place. 5, the adjustment of angle, the adjustment of this angle has particular concern with the product, change 90 ° pattern generally speaking, so the angle that intermediate angle must be more than both sides, so its degree of tightness can undertake according to adjusting screw, when folding a turn, can undertake the adjustment of pressure through pressure watch, avoid a mould broken. CNC Milling CNC Machining